• Remember Mailing List

  • Remember trunk w/ Plone 2.5.3

    from "Eric Thomas" on Mar 23, 2008 06:53 PM
    I've been unable to use the remember trunk starting with everything after
    r51996 where the IVocabularyFactory interface was introduced.
    
    Error:
    ZopeXMLConfigurationError: File
    "/home/zope-carechurch/zope/dev/Products/remember/browser/configure.zcml",
    line 21.2-25.8
    ConfigurationError: ('Invalid value for', 'provides', 'ImportError: Module
    zope.schema.interfaces has no global IVocabularyFactory')
    
    Full log is posted here:  http://paste.plone.org/20295
    
    I'm using:
    Plone-2.5.3,
    zope-2.9.8
    Five 1.4.4  (also tried Five 1.4.2)
    membrane-1.0
    
    What do I need to upgrade to get back on track with the remember trunk?
    (hopefully not Plone 3 yet)
    
    Thanks,
    - Eric
    
    
    Thread Outline:
  • Re: Remember trunk w/ Plone 2.5.3

    from ra on May 12, 2008 09:41 PM
    again, this is quite old, perhaps moot to the original poster by now.  :-P
    
    Eric Thomas wrote:
    > I've been unable to use the remember trunk starting with everything 
    > after r51996 where the IVocabularyFactory interface was introduced.
    
    you're right.  it seems like jensens was a bit eager and removed 2.5 support 
    before i had intended.
    
    i'm currently setting up a 1.0 branch, which will be a copy of trunk but with 
    all of the older spellings (for the vocabulary stuff and annotations) put back in.
    
    -r
    
    >  
    > Error:
    > ZopeXMLConfigurationError: File 
    > "/home/zope-carechurch/zope/dev/Products/remember/browser/configure.zcml", 
    > line 21.2-25.8
    > ConfigurationError: ('Invalid value for', 'provides', 'ImportError: 
    > Module zope.schema.interfaces has no global IVocabularyFactory')
    >  
    > Full log is posted here:  http://paste.plone.org/20295
    >  
    > I'm using:
    > Plone-2.5.3,
    > zope-2.9.8
    > Five 1.4.4  (also tried Five 1.4.2)
    > membrane-1.0
    >  
    > What do I need to upgrade to get back on track with the remember 
    > trunk?   (hopefully not Plone 3 yet)
    >  
    > Thanks,
    > - Eric
    >  
    
    
    • Re: Remember trunk w/ Plone 2.5.3

      from "Eric Thomas" on May 13, 2008 10:25 AM
      Actually Rob, I appreciate the response.  I havn't had time yet to tackle
      the Plone 3 upgrade.
      Regards,
      Eric
      
      
      
      On Mon, May 12, 2008 at 8:42 PM, Rob Miller <robm@...> wrote:
      
      > again, this is quite old, perhaps moot to the original poster by now.  :-P
      >
      >
      > Eric Thomas wrote:
      >
      > > I've been unable to use the remember trunk starting with everything
      > > after r51996 where the IVocabularyFactory interface was introduced.
      > >
      >
      > you're right.  it seems like jensens was a bit eager and removed 2.5
      > support before i had intended.
      >
      > i'm currently setting up a 1.0 branch, which will be a copy of trunk but
      > with all of the older spellings (for the vocabulary stuff and annotations)
      > put back in.
      >
      > -r
      >
      >
      >  Error:
      > > ZopeXMLConfigurationError: File
      > > "/home/zope-carechurch/zope/dev/Products/remember/browser/configure.zcml",
      > > line 21.2-25.8
      > > ConfigurationError: ('Invalid value for', 'provides', 'ImportError:
      > > Module zope.schema.interfaces has no global IVocabularyFactory')
      > >  Full log is posted here:  http://paste.plone.org/20295
      > >  I'm using:
      > > Plone-2.5.3,
      > > zope-2.9.8
      > > Five 1.4.4  (also tried Five 1.4.2)
      > > membrane-1.0
      > >  What do I need to upgrade to get back on track with the remember trunk?
      > >   (hopefully not Plone 3 yet)
      > >  Thanks,
      > > - Eric
      > >
      > >
      >
      >
      >
      > --
      > Archive:
      > http://www.openplans.org/projects/remember/lists/remember/archive/2008/05/1210642884510
      > To unsubscribe send an email with subject unsubscribe to
      > remember@....  Please contact
      > remember-manager@... for questions.
      >
      >